The first major use of metal for the construction of buildings was large steel-framed buildings, which appeared a little over 100 years ago. Until then, the main building materials were bricks and wood. Metal is becoming more popular as a building material, particularly for small buildings. It is used for roofs and walls as well as for frames. Completely metal buildings are becoming rather commonplace.

Steel is not a modern discovery. It has been used for thousands of years to make sword blades and for other high value applications. What is new is relatively inexpensive steel. Since the Bessemer process of the nineteenth century, steel has been adapted to more and more applications.

Steel alloys are formed by combining other materials such as chrome and nickel into the mix when the steel is made. Some alloys such as stainless steel are resistant to rust. Those that aren’t can be plated with zinc in a process called galvanizing to protect them from water. Paints have also been formulated to be protective against rust.

Aluminum was considered a semi-precious metal until the last century. Innovations in aluminum refining have made it quite affordable. It is not quite as strong as steel, but it for many applications it is easier to work with. Unlike steel, it does not require special treatment to protect it from water. On exposure to the air, aluminum develops a thin, tough coat of oxide that protects it from the elements. Future steel buildings are often painted, but only to improve the way it looks.

Copper is not very strong and rather expensive, so it would not be a good choice for framing. It is sometimes used for walls or roofs. When it weathers it acquires an attractive greenish sheen. This is due to oxidation which does not penetrate enough to cause serious weakness.

Quonset huts appeared all over the place during World War II. The first mass produced metal buildings, they had a curved piece of galvanized steel that combined roof and sidewalls into one unit. These pieces could be stacked for easy shipping. They were easy to put up and easy to take down.

Utility storage buildings and larger auxiliary structures, including garages, are commonly completely built from steel today. Steel is durable, strong, and low cost. The buildings are straightforward to put together. One will still sometimes encounter a quonset hut, but future steel buildings are more popular. They provide more usable space in the same foot print as a quonset hut would.

Steel framing is entirely suitable for residential construction. Aluminum framing is also sometimes used in cases where the full strength of steel is not necessary. Computer controlled equipment for fabricating custom aluminum framing on the job site is available. Metal framing is very common in factory built modular homes. It is less common in conventional construction, but growing in popularity.

Sheet metal is a practical material for roofing. It can be made into surrogate shingles, or used in larger sheets. It can be treated to give it a better appearance and more resistance to the weather. It can also be used for walls, even made into pieces that look like old school wooden clapboards.

More and more construction is being done with metal. Metal buildings reduce the use of wood. Since wood supplies are under pressure this is an environmentally good thing to do. Metal building materials are usually recyclable. Anybody doing construction should consider the use of metal.

These future steel buildings provide storage solutions that can withstand extreme weather conditions. Choose from a wide range of future steel buildings designs at affordable prices. Future steel buildings do not require prior construction experience.